Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 281

COSD_HIGH_PRIO_QUEUES_SESSION
System Log Message
Description
Type
Severity
Facility
Action
COSD_HWDB_OPEN_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
COSD_IFD_OUTPUT_SHAPING_RATE_ERR
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Unable to apply CoS to L2TP session session-id, because multiple schedulers in scheduler
map scheduler-map have "high,""medium-high," or "strict-high" priority
The class-of-service (CoS) process (cosd) did not apply CoS settings to the indicated
Layer 2 Tunneling Protocol (L2TP) session, because the scheduler map specified by the
RADIUS server for the session includes more than one scheduler that has high,
medium-high, or strict-high priority. For interfaces that are housed by certain Physical
Interface Cards (PICs), such as an IQ2 PIC, the scheduler map can include only one
scheduler that specifies one of those three priority levels. In terms of configuration, the
'priority' statement at the [edit class-of-service schedulers <scheduler-name>] hierarchy
level has the value 'high, ' 'medium-high, ' or 'strict-high' for more than one of the
schedulers in the map. The map is associated with a traffic control profile that is named
by an attribute in the RADIUS server's configuration file, which makes the profile apply
to the session.
Error: An error occurred
error
LOG_DAEMON
Correct the configuration so that the scheduler map includes only one scheduler with
high, medium-high, or strict-high priority.
Unable to open chassis hardware database: error-message
The class-of-service (CoS) process (cosd) encountered the indicated error while opening
the chassis hardware database.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Traffic shaping not supported on interface device interface-name
The class-of-service (CoS) process (cosd) did not apply the shaping rate that is configured
for the indicated interface.
Error: An error occurred
error
Chapter 20: COSD System Log Messages
217