Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 305

Facility
Action
DHCPD_RTSOCK_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
DHCPD_SENDMSG_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
DHCPD_SENDMSG_NOINT_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
Copyright © 2010, Juniper Networks, Inc.
LOG_AUTH
Contact your technical support representative.
Error with rtsock: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) experienced the
indicated error with a routing socket.
Error: An error occurred
info
LOG_AUTH
An internal software failure occurred.
Contact your technical support representative.
sendmsg() from source-address to port destination-port at destination-address via
interface interface-name and routing instance routing-instance failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not send data
from the indicated source (address, interface, and routing instance) to the indicated
destination (port and address), which it needs to do during normal operation.
Error: An error occurred
error
LOG_AUTH
Contact your technical support representative.
sendmsg() from source-address to port destination-port at destination-address via routing
instance routing-instance failed: error-message
The Dynamic Host Configuration Protocol server process (dhcpd) could not send data
from the indicated source (address and routing instance) to the indicated destination
(port and address), which it needs to do during normal operation.
Error: An error occurred
error
LOG_AUTH
Contact your technical support representative.
Chapter 24: DHCPD System Log Messages
241