Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 640

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
RT_SCCP_CALL_RATE_EXCEED
System Log Message
Description
Type
Severity
Facility
RT_SCCP_DECODE_FAIL
System Log Message
Description
Type
Severity
Facility
RT_SCCP_NAT_COOKIE_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
RT_SCCP_REM_NAT_VEC_FAIL
System Log Message
Description
Type
Severity
Facility
RT_SCCP_UNREG_RM_FAIL
System Log Message
576
The maximum SCCP call limit has been exceeded.
Error: An error occurred
error
LOG_PFE
The SCCP active call rate limit maximum-value has been exceeded
The SCCP active call rate limit has been exceeded.
Error: An error occurred
error
LOG_PFE
Failed to decode SCCP packet from source-address->destination-address
Failed to decode SCCP packet.
Error: An error occurred
error
LOG_PFE
Failed to find SCCP ALG cookie from session
Failed to find SCCP NAT cookie.
Error: An error occurred
error
LOG_PFE
Failed to remove SCCP ALG vector from flow module
Failed to remove the SCCP ALG vector from the flow module.
Error: An error occurred
error
LOG_PFE
Failed to unregister SCCP client from Resource Manager when the ALG was unregistered
Copyright © 2010, Juniper Networks, Inc.