Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 156

Junos 10.3 System Log Messages Reference
Facility
ASP_SFW_IP_PACKET_CHECKSUM_ERROR
System Log Message
Description
Type
Severity
Facility
ASP_SFW_IP_PACKET_DST_BAD
System Log Message
Description
Type
Severity
Facility
ASP_SFW_IP_PACKET_FRAG_LEN_INV
System Log Message
Description
Type
Severity
Facility
92
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics, because
the packet checksum was incorrect. The discarded packet contained the indicated
information about its protocol (numerical identifier and name), source (logical interface
name, IP address, and port number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics, because
the packet destination address was either a multicast address or was in the range reserved
for experimental use (248.0.0.0 through 255.255.255.254). The discarded packet
contained the indicated information about its protocol (numerical identifier and name),
source (logical interface name, IP address, and port number), and destination (IP address
and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name),
source-interface-nameseparatorsource-address:source-port ->
destination-addressdestination-port, event-type
The stateful firewall discarded the packet with the indicated characteristics and all
related IP fragments it had previously received, because the length of a fragment was
invalid. The discarded packet contained the indicated information about its protocol
(numerical identifier and name), source (logical interface name, IP address, and port
number), and destination (IP address and port number).
Event: This message reports an event, not an error
notice
LOG_PFE
Copyright © 2010, Juniper Networks, Inc.