Chapter 44 L2Ald System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 44
L2ALD System Log Messages
L2ALD_DUPLICATE_RBEB_MAC
System Log Message
Description
Type
Severity
Facility
Action
L2ALD_GENCFG_OP_FAILED
System Log Message
Description
Type
Severity
Facility
Action
L2ALD_IPC_MESSAGE_ERROR
System Log Message
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
2 address learning process (l2ald), which supports the dynamic acquisition of information
about media access control (MAC) addresses in a Layer 2 bridge environment.
Duplicate RBEB mac has been detected (mac-address). LE already exists with pbbn_id
: pbbn-id. Rejecting LE create with pbbn_id :new-pbbn-id
The l2 learning process (l2ald) already has this particular BEB mac existing for a different
PBBN ID.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Unable to complete gencfg operation operation (major type, minor subtype): error-message
The Layer 2 address learning process (l2ald) could not send Layer 2 forwarding-related
information to the Packet Forwarding Engines, because the indicated operation failed
during configuration generation.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Message (type message-type, subtype message-subtype, opcode message-opcode)
received with error error-message
prefix. They are generated by the Layer
L2ALD
349