Chapter 72 Rmopd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 72
RMOPD System Log Messages
RMOPD_ADDRESS_MULTICAST_INVALID
System Log Message
Description
Type
Severity
Facility
RMOPD_ADDRESS_SOURCE_INVALID
System Log Message
Description
Type
Severity
Facility
RMOPD_ADDRESS_STRING_FAILURE
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Simple Network Management Protocol (SNMP) remote operations process (rmopd),
which services SNMP requests for execution of ping and traceroute operations.
Multicast address is not allowed
When a Simple Network Management Protocol (SNMP) client requests a remote
operation, it can specify the addresses of the source and target hosts for the operation.
A request failed because the client specified a multicast address for either or both the
source and target hosts.
Error: An error occurred
error
LOG_DAEMON
Source address invalid: error-message
When a Simple Network Management Protocol (SNMP) client requests a remote
operation, it can specify the address to use as the source host for the operation, along
with the corresponding address type (such as IP version 4 [IPv4]). Either the specified
address was invalid because it did not match the specified address type, or the address
could not be resolved.
Error: An error occurred
notice
LOG_DAEMON
Unable to convert numeric address to string: error-message
The remote Simple Network Management Protocol (SNMP) operations process (rmopd)
could not convert a numeric host address to the corresponding hostname text string.
prefix. They are generated by the
RMOPD
493