Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 376

Junos 10.3 System Log Messages Reference
JDIAMETERD_FUNC_OUT_OF_SYNC
System Log Message
Description
Type
Severity
Facility
JDIAMETERD_FUNC_PICACCEPT_NFOUND
System Log Message
Description
Type
Severity
Facility
JDIAMETERD_FUNC_TOO_MANY_BADE2ES
System Log Message
Description
Type
Severity
Facility
JDIAMETERD_FUNC_USCK_LISTEN_FAIL
System Log Message
Description
Type
Severity
Facility
312
Application diameter-function is out of sync, disconnecting
The Diameter process (jdiameterd) was out of sync with the process that implements
the Diameter function. The connection was closed so that a new connection with full
resynchronization could be established.
Error: An error occurred
error
LOG_DAEMON
Port remote-port does not match any application
The Diameter process(jdiameterd) rejected a PIC function side connection because there
is no matching diameter-function.
Error: An error occurred
error
LOG_DAEMON
Application diameter-function has too many bad end-to-end-ids, disconnecting
A daemon impelenting diameter function, sent too many messages with bad
end-to-end-ids the connection will be closed, so a new connection with full
resynchronization could be established.
Error: An error occurred
error
LOG_DAEMON
Unable to listen on pathname
The Diameter process(jdiameterd) is unable to listen on the unix socket for function side
connections.
Error: An error occurred
error
LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.