Chapter 40 Jdiameterd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 40
JDIAMETERD System Log Messages
JDIAMETERD_FUNC_HSHAKE_FAIL
System Log Message
Description
Type
Severity
Facility
JDIAMETERD_FUNC_LOCACCEPT_NFOUND
System Log Message
Description
Type
Severity
Facility
JDIAMETERD_FUNC_NSCK_LISTEN_FAIL
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
the jdiameter process (jdiameterd). Jdiameter is an open source software implementation
of the Diameter Base Protocol that is written in Java.
Application diameter-function cannot generate handshake, disconnecting
The Diameter process(jdiameterd) failed to generate handshake message to the process
that implements the Diameter-function. The connection was closed so that a new
connection with full resynchronization could be established.
Error: An error occurred
error
LOG_DAEMON
Path pathname does not match any application
The Diameter process(jdiameterd) rejected a RE function side connection because there
is no matching diameter-function.
Error: An error occurred
error
LOG_DAEMON
Unable to listen on internal-ip
The Diameter process(jdiameterd) is unable to listen on the internal ip socket for function
side connections.
Error: An error occurred
error
LOG_DAEMON
prefix. They are generated by
JDIAMETERD
311