Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 655

SDXD_KEEPALIVES_MISSED
System Log Message
Description
Type
Severity
Facility
SDXD_KEEPALIVE_SEND_FAIL
System Log Message
Description
Type
Severity
Facility
Cause
SDXD_MGMT_SOCKET_IO
System Log Message
Description
Type
Severity
Facility
Cause
SDXD_OUT_OF_MEMORY
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
No server keepalives received for three intervals
The Session and Resource Control (SRC) process (sdxd) and SRC server exchange
keepalive messages at regular intervals. The process did not receive a keepalive from
the server for three consecutive keepalive intervals. In this case, it closes the session and
tries to connect to another SRC server.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Unable to send keepalive
The Session and Resource Control (SRC) process (sdxd) could not send a keepalive
message to the SRC server, which it does periodically to maintain its connection to the
server.
Event: This message reports an event, not an error
notice
LOG_DAEMON
There might have been a network problem.
management daemon I/O failure: reason
The Service Deployment System process (sdxd) could not read from or write to the
management socket that it uses to communicate with the Junos management process
(mgd).
Error: An error occurred
error
LOG_DAEMON
The mgd process might have exited abnormally.
Insufficient memory during operation
The Service Deployment System (sdxd) attempted to allocate memory for an internal
object during the indicated operation. The attempt failed.
Error: An error occurred
Chapter 79: SDXD System Log Messages
591