Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 337

Description
Type
Severity
Facility
Cause
Action
FSAD_FILE_RENAME
System Log Message
Description
Type
Severity
Facility
Cause
Action
FSAD_FILE_STAT
System Log Message
Description
Type
Severity
Facility
Cause
Action
FSAD_FILE_SYNC
System Log Message
Copyright © 2010, Juniper Networks, Inc.
The File System Access process (fsad) could not remove the indicated file for the
indicated reason.
Error: An error occurred
error
LOG_DAEMON
The file to be removed does not exist or its permissions do not allow the operation.
Make sure that the file exists and that its permissions allow it to be deleted.
Unable to rename file 'source-filename' to 'destination-filename': reason
The File System Access process (fsad) could not rename the indicated file for the
indicated reason.
Error: An error occurred
error
LOG_DAEMON
Either the source file does not exist, or one or both of the source and destination
pathnames are incorrect.
Make sure the source and destination paths exist and that the rename operation is
allowed.
function-name: stat() failed for file pathname pathname: reason
The File System Access process (fsad) received a request for a nonexistent file.
Error: An error occurred
error
LOG_DAEMON
The file path does not exist.
Make sure the path specified in the request is valid.
Unable to sync file 'filename': reason
Chapter 31: FSAD System Log Messages
273