Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 264

Junos 10.3 System Log Messages Reference
Facility
Action
CHASSISD_ROOT_MOUNT_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_RTS_SEQ_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
CHASSISD_SBOARD_VERSION_MISMATCH
System Log Message
Description
Type
Severity
Facility
Cause
Action
CHASSISD_SENSOR_RANGE_NOTICE
System Log Message
200
LOG_DAEMON
Increase cooling in the area around the chassis.
Unable to determine the mount point for root directory: error-message
The chassis process (chassisd) could not determine the mount point for the root file
system.
Error: An error occurred
error
LOG_DAEMON
ifmsg sequence gap expected-value - received-value
The chassis process (chassisd) received a routing socket message out of order.
Event: This message reports an event, not an error
warning
LOG_DAEMON
A routing socket message was lost because of excessive load or lack of memory.
Version mismatch: chassisd message version expected-value fru-name message version
received-value local IPC version local-ipc-version remote IPC version remote-ipc-version
The chassis process (chassisd) verifies that it supports the revision level or version of a
component (field-replaceable unit, or FRU). The revision level for the indicated FRU was
unsupported or otherwise invalid.
Error: An error occurred
error
LOG_DAEMON
Either a previous software upgrade did not complete successfully, or the chassisd process
or FRU did not restart after a successful software upgrade.
Upgrade the software and reboot the routing platform.
fru-name fru-slot temperature is temperature degrees C, which is outside operating range
Copyright © 2010, Juniper Networks, Inc.