Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 459

Severity
Facility
L2TPD_TUNNEL_DEST_IF_LOOKUP_FAIL
System Log Message
Description
Type
Severity
Facility
L2TPD_TUNNEL_GROUP_ADD_FAILED
System Log Message
Description
Type
Severity
Facility
L2TPD_TUNNEL_GROUP_CFG_ADD_FAIL
System Log Message
Description
Type
Severity
Facility
L2TPD_TUNNEL_GROUP_CFG_DEL_FAIL
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
error
LOG_NEWS
Unable to find destination interface for L2TP tunnel tunnel-id remote address:
error-message
The Layer 2 Tunneling Protocol process (l2tpd) tried to use route lookup to determine
which local logical interface to use to reach the remote end of the indicated tunnel. The
attempt failed.
Error: An error occurred
error
LOG_NEWS
Unable to create L2TP tunnel group
The Layer 2 Tunneling Protocol process (l2tpd) could not create a tunnel group.
Error: An error occurred
error
LOG_NEWS
Unable to add tunnel group tunnel-group (service set service-set) to configuration for
PIC pic-slot: error-message
The Layer 2 Tunneling Protocol process (l2tpd) maintains a copy of the Junos
configuration database in memory. It could not add information about the indicated
tunnel group and service set to the in-memory configuration for the indicated PIC.
Error: An error occurred
error
LOG_NEWS
Unable to delete tunnel group tunnel-group (service set service-set): error-code
The Layer 2 Tunneling Protocol process (l2tpd) could not delete information about the
indicated tunnel group and service set.
Error: An error occurred
error
LOG_NEWS
Chapter 46: L2TPD System Log Messages
395