Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 582

Junos 10.3 System Log Messages Reference
RPD_KRT_IFL_GENERATION
System Log Message
Description
Type
Severity
Facility
Cause
RPD_KRT_KERNEL_BAD_ROUTE
System Log Message
Description
Type
Severity
Facility
Cause
Action
RPD_KRT_NEXTHOP_OVERFLOW
System Log Message
Description
Type
Severity
Facility
518
ifl logical-interface-index generation mismatch -- rpd rpd-interface-name rpd-generation
kernel kernel-interface-name.kernel-interface-unit kernel-generation
The routing protocol process (rpd) received a message from the kernel in which the
logical interface associated with the indicated numerical index differed from the
interface-to-index mapping maintained by rpd.
Event: This message reports an event, not an error
notice
LOG_DAEMON
It is possible that rpd discarded some interface messages from the kernel without
processing them because it received more messages than it could handle. It will recover.
task-name: lost interface-hierarchy logical-interface-index for route route-prefix
As it restarted, the routing protocol process (rpd) could not process a route obtained
from the kernel because the route contained references to objects that are no longer
valid.
Event: This message reports an event, not an error
warning
LOG_DAEMON
rpd did not recognize some elements in the route message, such as the logical interface
index or an address family.
rpd can probably solve the problem, but check the entry for the indicated route prefix in
the forwarding table. If the prefix's route and forwarding table entry are inconsistent,
contact a technical support representative for instructions.
type route-prefix: number of next hops (count) exceeded the maximum allowed
(maximum-value) -- truncating
The number of next hops for the indicated route exceeded the indicated limit for a single
route add operation.
Error: An error occurred
error
LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.