Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 686

Junos 10.3 System Log Messages Reference
Severity
Facility
Cause
Action
TASK_ASSERT_SOFT
System Log Message
Description
Type
Severity
Facility
Cause
Action
TASK_EXIT
System Log Message
Description
Type
Severity
Facility
Cause
Action
TASK_LOCK_FLOCKED
System Log Message
622
error
ANY
An internal software failure occurred.
Examine the messages that immediately follow this message in the system log for
information about possible causes. Contact a technical support representative, and be
ready to provide the list of messages and the diagnostic core dump, if requested.
Soft assertion failed executable-name[pid]: file "source-filename", line line-number:
"message", daemon continued running
The source code for the process includes internal self-consistency checks. A check failed
but the process continued running. It created a diagnostic core dump for analysis by
technical support personnel and noted the number of the line in the source file where
the check failed.
Error: An error occurred
error
ANY
An internal software failure occurred.
Examine the messages that immediately follow this message in the system log for
information about possible causes. Contact a technical support representative, and be
ready to provide the list of messages and the diagnostic core dump, if requested.
Exit executable-name[pid] version version built by builder on date, caller address
The process exited, either in response to a user request or because of a system error.
Event: This message reports an event, not an error
notice
ANY
A system resource was unavailable, an unexpected error occurred, or a user terminated
the process.
Examine the messages that immediately follow this message in the system log for
information about possible causes.
Unable to obtain a lock on filename, is another copy of the process running?
Copyright © 2010, Juniper Networks, Inc.