Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 672

Junos 10.3 System Log Messages Reference
Severity
Facility
SNMPD_TRAP_GEN_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_TRAP_INVALID_DATA
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMPD_TRAP_QUEUED
System Log Message
Description
Type
Severity
Facility
Cause
608
critical
LOG_DAEMON
function-name: SNMP trap error: trap-message (error-message)
The Simple Network Management Protocol (SNMP) agent process (snmpd) could not
generate a trap.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
function-name: SNMP trap error: invalid message (value) received
The Simple Network Management Protocol (SNMP) agent process (snmpd) received a
trap message from a subagent that contained an invalid variable binding (varbind) type.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Adding trap to trap-destination to queue-name queue, size traps in queue
A trap was queued for later transmission.
Event: This message reports an event, not an error
info
LOG_DAEMON
Possible causes include the following: (a) the system is not completely initialized, (b) a
route does not exist, or (c) traps are being throttled.
Copyright © 2010, Juniper Networks, Inc.