Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 475

Action
LIBJNX_SNMP_ENGINE_SCAN_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
LIBJNX_SOCKET_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
LIBJNX_XML_DECODE_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
Copyright © 2010, Juniper Networks, Inc.
Contact your technical support representative.
function-name: fscanf : filename scanning: data Error: error-message
A JUNOS process could not perform the scan operation on the indicated SNMP engine
data file.
Error: An error occurred
critical
ANY
An internal software failure occurred.
Contact your technical support representative.
operation: error-message
Various system processes use Transmission Control Protocol (TCP), User Datagram
Protocol (UDP), and Reliable Data Protocol (RDP) sockets. The indicated socket operation
failed for the indicated reason.
Error: An error occurred
emergency
ANY
An internal software failure occurred.
Contact your technical support representative.
Invalid XML encoding 'data', skipping to ';'
The XML parser ignored the indicated XML data sent by a client application, because the
XML encoding of the data was invalid. The parser skipped ahead to the likely endpoint
for the invalid data.
Error: An error occurred
error
ANY
A possible cause is improper escaping of character constants in the data stream.
Contact your technical support representative.
Chapter 50: LIBJNX System Log Messages
411