Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 289

COSD_TRICOLOR_NOT_SUPPORTED
System Log Message
Description
Type
Severity
Facility
Action
COSD_TX_QUEUE_RATES_TOO_HIGH
System Log Message
Description
Type
Severity
Facility
Action
COSD_UNKNOWN_CLASSIFIER
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
Unable to apply scheduler scheduler-map to interface interface-name, because it does
not support tricolor marking
The class-of-service (CoS) process (cosd) did not apply the indicated scheduler map
to the indicated interface, because a scheduler included in the map specifies a packet
loss priority (PLP) that is supported only with tricolor marking (TCM). The interface does
not support TCM, either because TCM is not enabled or the interface is on a router that
does not support TCM. In terms of configuration, the value 'medium-high' or 'medium-low'
is specified for the 'loss-priority' statement in a scheduler definition at the [edit
class-of-service schedulers <scheduler-name> drop-profile-map] hierarchy level. The
scheduler is included in the scheduler map applied to the interface, but the 'tri-color'
statement is either not included at the [edit class-of-service] hierarchy level, or is not
supported.
Error: An error occurred
error
LOG_DAEMON
Change the value of the 'loss-priority' statement in the scheduler or include the 'tri-color'
statement to enable TCM on the router.
Unable to apply scheduler map scheduler-map to interface interface-name: sum of
scheduler transmission rates exceeds interface shaping or transmission rate
The class-of-service (CoS) process (cosd) did not apply the indicated scheduler map
to the indicated interface, because the sum of the queue transmission rates defined in
the schedulers in the scheduler map exceeds the shaping or transmission rate for the
interface. In terms of configuration, the 'transmit-rate' statement is specified for each
scheduler at the [edit class-of-service schedulers <scheduler-name>] hierarchy level.
The sum of the configured transmission rates exceeds the transmission or shaping rate
of the interface.
Error: An error occurred
error
LOG_DAEMON
Decrease the value of one or more 'transmit-rate' statements so that the sum is less
than the interface transmission or shaping rate.
classifier type classifier-type is invalid
The class-of-service (CoS) process (cosd) did not recognize the indicated classifier type
from the rtsock library.
Chapter 20: COSD System Log Messages
225