Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 547

Type
Severity
Facility
Cause
PPPD_PAP_OPERATION_UNEXPECTED
System Log Message
Description
Type
Severity
Facility
PPPD_POOL_ADDRESSES_EXHAUSTED
System Log Message
Description
Type
Severity
Facility
Action
PPPD_RADIUS_ADD_SERVER_FAILED
System Log Message
Description
Type
Severity
Facility
PPPD_RADIUS_ALLOC_PASSWD_FAILED
System Log Message
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
error
LOG_AUTH
The local password was not defined for the local hostname.
interface-name: unexpected operation type operation (PAP ID message-id)
The Point-to-Point Protocol process (pppd) received a Password Authentication Protocol
(PAP) message with the indicated identifier and operation type. The operation type was
not valid.
Error: An error occurred
info
LOG_AUTH
No addresses available in pool "pool-name" to assign to remote peer on interface
interface-name
The Point-to-Point Protocol process (pppd) could not assign an address from the
indicated address pool to the remote peer on the indicated interface, because there were
no more addresses available in the pool.
Error: An error occurred
error
LOG_AUTH
Increase the number of addresses in the address pool.
Unable to add RADIUS server radius-server for profile access-profile: error-message
The Point-to-Point Protocol process (pppd) could not add the indicated RADIUS server
for the indicated access profile.
Error: An error occurred
error
LOG_AUTH
Unable to allocate RADIUS password of size size: error-message
Chapter 69: PPPD System Log Messages
483