Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 415

System log messages reference
Table of Contents

Advertisement

Action
L2ALD_MAC_LIMIT_REACHED_BD
System Log Message
Description
Type
Severity
Facility
Action
L2ALD_MAC_LIMIT_REACHED_GLOBAL
System Log Message
Description
Type
Severity
Facility
Action
L2ALD_MAC_LIMIT_REACHED_IF
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
Contact your technical support representative.
Limit on learned MAC addresses reached for routing instance 'routing-instance', domain
'bridge-domain:vlan-id'; current count is count
The Layer 2 address learning process (l2ald) stopped adding addresses to the MAC
address table that were learned by interfaces in the indicated bridging domain, because
the indicated count of learned addresses exceeds the configured or default limit for the
bridge-domain.
Event: This message reports an event, not an error
error
LOG_DAEMON
Increase the limit on addresses learned by interfaces in the bridge domain, by increasing
the value of the 'interface-mac-limit' statement at the [edit routing-instances
<routing-instance-name> bridge-domains <bridge-domain-name> bridge-options]
hierarchy level.
Global limit on learned MAC addresses reached; current count is count
The Layer 2 address learning process (l2ald) stopped adding addresses to the MAC
address table, because the indicated count of learned addresses exceeds the limit for
the router.
Event: This message reports an event, not an error
error
LOG_DAEMON
Increase the limit on addresses learned by the interfaces on the router by increasing the
value of the 'global-mac-limit' statement at the [edit protocols l2-learning] hierarchy
level.
Limit on learned MAC addresses reached for interface-name; current count is count
The Layer 2 address learning process (l2ald) stopped adding addresses to the MAC
address table that were learned by the indicated interface, because the indicated count
of learned addresses exceeds the limit configured for the interface.
Event: This message reports an event, not an error
error
LOG_DAEMON
Chapter 44: L2ALD System Log Messages
351

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junos os 10.3 - software

Table of Contents

Save PDF