Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 168

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
ASP_SVC_SET_MAX_FLOWS_EXCEEDED
System Log Message
Description
Type
Severity
Facility
104
about its protocol (numerical identifier and name), source (logical interface name, IP
address, and port number), and destination (IP address and port number).
Event: This message reports an event, not an error
critical
LOG_PFE
Number of flows (currently current-flows) exceeded configured limit (maximum-value)
count times in previous 60 seconds
A flow was not created for a service and service set, because the current number of flows
for all supported services exceeded the limit configured with the 'max-flows' statement
at the [edit services service-set <service-set-name>] hierarchy level. The message
appears once per minute and reports the number of times in the previous 60 seconds
that the system noted the excessive number of flows.
Event: This message reports an event, not an error
notice
LOG_PFE
Copyright © 2010, Juniper Networks, Inc.