Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 256

Junos 10.3 System Log Messages Reference
CHASSISD_PIC_CMD_GIVEUP
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_PIC_CMD_TIMEOUT
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_PIC_CONFIG_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_PIC_HWERROR
System Log Message
Description
192
function-name: attempt fpc-slot to bring PIC pic-slot in FPC count online timed out;
stopped trying
The chassis process (chassisd) tried the indicated number of times to bring the indicated
PIC online, but stopped trying after all attempts failed.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: attempt to bring PIC pic-slot in FPC fpc-slot online timed out
The chassis process (chassisd) tried to bring the indicated PIC online. The attempt took
longer than the standard time allotted for that operation.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Unable to create interface devices during attachment of PIC pic-slot in FPC fpc-slot:
graceful switchover not supported
The chassis process (chassisd) did not create an interface device for the indicated PIC,
because graceful switchover was enabled but is not supported in combination with that
PIC type. A PIC must have an interface device to come online, so it remained offline.
Error: An error occurred
error
LOG_DAEMON
Remove the PIC or upgrade the Junos OS.
PIC pic-slot in FPC fpc-slot (PIC type pic-type, version version) had hardware error
The indicated PIC experienced a hardware error. The chassis process (chassisd) did not
bring the PIC online.
Copyright © 2010, Juniper Networks, Inc.