Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 470

Junos 10.3 System Log Messages Reference
LIBJNX_DEFAULT_IP_ADDR_NOT_SET
System Log Message
Description
Type
Severity
Facility
Cause
Action
LIBJNX_EVLIB_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
LIBJNX_EXEC_EXITED
System Log Message
Description
Type
Severity
Facility
Cause
Action
LIBJNX_EXEC_FAILED
System Log Message
406
Unable to retrieve system default IP address: not set in kernel (error-message)
A JUNOS process could not retrieve the system default IP address from the kernel,
because the address is not defined there.
Error: An error occurred
critical
ANY
An internal software failure occurred.
Contact your technical support representative.
function-name: error-message
A JUNOS process called the indicated function in the event library. The function failed
for the indicated reason.
Error: An error occurred
emergency
ANY
An internal software failure occurred.
Contact your technical support representative.
Command stopped: PID pid, signal='return-value'core-dump-status, command 'command'
A JUNOS process created a child process to execute the indicated command for it. The
child process stopped unexpectedly.
Error: An error occurred
notice
ANY
An internal software failure occurred.
Contact your technical support representative.
Child exec failed for command 'command': error-message
Copyright © 2010, Juniper Networks, Inc.