Chapter 64 Pfe System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 64
PFE System Log Messages
PFE_ANALYZER_CFG_FAILED
System Log Message
Description
Type
Severity
Facility
PFE_ANALYZER_SHIM_CFG_FAILED
System Log Message
Description
Type
Severity
Facility
PFE_ANALYZER_TABLE_WRITE_FAILED
System Log Message
Description
Type
Severity
Facility
PFE_ANALYZER_TASK_FAILED
System Log Message
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Forwarding Engine controller, which manages packet forwarding functions.
Error in Analyzer error-message for index = index error-code = error-code
The configuration analyzer terminated because an error occured during the configuration.
Error: An error occurred
error
ANY
Error in Analyzer error-message for index = index error-code = error-code
The configuration analyzer terminated because an error occured while the chip was being
programmed.
Error: An error occurred
error
ANY
index Could not create analyzer error-message table
The logical interfaces (ifl) index failed to configure the analyzer because of an error.
Error: An error occurred
error
ANY
Following task failed : error-message
prefix. They are generated by the Packet
PFE
459