Chapter 8 Apppxy System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 8
APPPXY System Log Messages
APPPXY_RESOURCE_OVERUSED_MT
System Log Message
Description
Type
Severity
Facility
APPPXY_SESSION_ABORT_MT
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Application Proxy process (apppxyd) which performs all of the services of a proxy, but
only for specific applications. The application proxy will only process packets that related
to the applications it supports.
ApplicationProxy: Suspicious client source-address:source-port
(->destination-address:destination-port) used percentage-value connections, which
exceeded the maximum allowed maximum-value connections
For ApplicationProxy, the amount of traffic from the specified source address exceeded
the amount permitted from one source. The maximum amount of traffic from one source
is a fixed percentage of the total amount of traffic
Event: This message reports an event, not an error
error
LOG_PFE
ApplicationProxy: session from source-address:source-port to
destination-address:destination-port aborted due to error-message (code error-code)
Report application protocol (ftp/http/pop3/smtp/imap) session is aborted
Event: This message reports an event, not an error
warning
LOG_PFE
prefix. They are generated by the
APPPXY
73