Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 707

UI_DBASE_ACCESS_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
UI_DBASE_CHECKOUT_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
UI_DBASE_EXTEND_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
Copyright © 2010, Juniper Networks, Inc.
Unable to reaccess configuration database file 'filename', address address, size size:
reason
To increase the size of the configuration database, the management process (mgd)
must unmap the database from its address space, change the database size, and remap
the database. The remapping operation failed.
Error: An error occurred
error
ANY
An internal software failure occurred.
Contact your technical support representative.
Database 'filename' is out of data and needs to be rebuilt
When the routing platform boots, the management process (mgd) checks the
configuration database for internal consistency. It found one or more inconsistencies.
Event: This message reports an event, not an error
alert
ANY
mgd restarted after new JUNOS software was installed.
None; mgd will rebuild the database.
Unable to extend configuration database file 'filename' to size requested-size: reason
The management process (mgd) could not increase the configuration database to the
indicated size.
Error: An error occurred
error
ANY
The hard disk is defective or is not installed in the routing platform.
Repair or replace the hard disk.
Chapter 88: UI System Log Messages
643