Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 149

Facility
ASP_L2TP_TUN_GRP_DEL_FAIL_INVLD
System Log Message
Description
Type
Severity
Facility
ASP_NAT_OUTOF_ADDRESSES
System Log Message
Description
Type
Severity
Facility
ASP_NAT_OUTOF_PORTS
System Log Message
Description
Type
Severity
Facility
ASP_NAT_POOL_RELEASE
System Log Message
Description
Type
Severity
Facility
ASP_NAT_RULE_MATCH
System Log Message
Copyright © 2010, Juniper Networks, Inc.
LOG_PFE
Unable to delete tunnel group group-id: ID is invalid
The Layer 2 Tunneling Protocol (L2TP) could not delete the tunnel group with the
indicated internal ID, because the ID is invalid.
Error: An error occurred
error
LOG_PFE
natpool nat-pool-name is out of addresses
Network Address Translation (NAT) services could not allocate an address from the
indicated NAT pool, because no addresses were available.
Event: This message reports an event, not an error
warning
LOG_PFE
natpool nat-pool-name is out of ports
Network Address Translation (NAT) services could not allocate a port from the indicated
NAT pool, because no ports were available.
Event: This message reports an event, not an error
warning
LOG_PFE
natpool release address:port[count]
Network Address Translation (NAT) services made the indicated number of ports available
in the pool for the indicated address, starting at the indicated port number.
Event: This message reports an event, not an error
info
LOG_PFE
syslog-prefix error-code: proto protocol-id (protocol-name) application: application,
source-interface-nameseparatorsource-address:source-port ->
Chapter 9: ASP System Log Messages
85