Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 396

Junos 10.3 System Log Messages Reference
Facility
KMD_PM_INVALID_LIFE_TYPE
System Log Message
Description
Type
Severity
Facility
KMD_PM_KEY_NOT_SUPPORTED
System Log Message
Description
Type
Severity
Facility
KMD_PM_LIFETIME_DUPLICATE
System Log Message
Description
Type
Severity
Facility
KMD_PM_LIFETIME_LENGTH_UNEQUAL
System Log Message
Description
332
LOG_SYSLOG
Invalid life type units-type found in the Quick Mode notification from
remote-address:remote-port
The IKE Quick Mode notification message from the indicated remote gateway and remote
port contains invalid life type. Second and Kilobytes are the only supported life types
currently. Hence Quick Mode notification payload is dropped.
Error: An error occurred
error
LOG_SYSLOG
Key type type not supported
The key management process (kmd) retrieved a key of the indicated type during Internet
Key Exchange (IKE) Phase 1. The key type is not one of the supported types, which are
public/private and preshared.
Error: An error occurred
error
LOG_AUTH
Phase 2 lifetime notification message from remote peer remote-address:remote-port
specified duplicate duration
During Internet Key Exchange (IKE) Phase 2 negotiation, the indicated remote peer
(address and port) sent a lifetime notification message that specified a duplicate value
for the security association (SA) lifetime duration. As a result, the key management
process (kmd) discarded the notification message.
Error: An error occurred
error
LOG_AUTH
Phase 2 lifetime notification message from remote peer remote-address:remote-port
had unequal payload length
During Internet Key Exchange (IKE) Phase 2 negotiation, the indicated remote peer
(address and port) sent a lifetime notification message with an unequal payload length.
As a result, the key management process (kmd) discarded the notification message.
Copyright © 2010, Juniper Networks, Inc.