Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 363

System log messages reference
Table of Contents

Advertisement

Severity
Facility
IDP_INTERNAL_ERROR
System Log Message
Description
Type
Severity
Facility
IDP_POLICY_COMPILATION_FAILED
System Log Message
Description
Type
Severity
Facility
IDP_POLICY_LOAD_FAILED
System Log Message
Description
Type
Severity
Facility
IDP_POLICY_LOAD_SUCCEEDED
System Log Message
Description
Type
Severity
Facility
IDP_POLICY_UNLOAD_FAILED
System Log Message
Copyright © 2010, Juniper Networks, Inc.
error
LOG_AUTH
Encountered an error(error-message)
IDP daemon encountered an internal error
Error: An error occurred
error
LOG_AUTH
IDP compilation of policy[idp-policy] failed : [reason]
IDP policy compiler encountered an error while compiling or packaging the policy.Device
will continue running the existing IDP policy
Event: This message reports an event, not an error
error
LOG_AUTH
IDP policy loading failed ;policy[idp-policy], detector[idp-detector] ,failure detail[reason]
A compiled and optimized IDP policy could not be loaded into IDP engine. Device will
continue running the existing IDP policy.
Error: An error occurred
error
LOG_AUTH
IDP policy[idp-policy] and detector[idp-detector] loaded successfully(message).
A compiled and optimized IDP policy was loaded successfully into the IDP engine. All
subsequent sessions will be processed as per this new IDP policy.
Event: This message reports an event, not an error
notice
LOG_AUTH
Failed to unload IDP policy. reason: reason.
Chapter 37: IDP System Log Messages
299

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.3 - software

Table of Contents