Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 600

Junos 10.3 System Log Messages Reference
Action
RPD_MLD_DYN_CFG_SES_ID_ADD_FAIL
System Log Message
Description
Type
Severity
Facility
RPD_MLD_DYN_CFG_SES_ID_MISMATCH
System Log Message
Description
Type
Severity
Facility
Action
RPD_MLD_JOIN
System Log Message
Description
Type
Severity
Facility
RPD_MLD_LEAVE
System Log Message
Description
Type
Severity
536
Remove the unsupported configuration statement.
Failed to add dynamic configuration session id client-session-id to interface
interface-name.
Failed to associate the indicated dynamic configuration session id to specified interface.
The dynamic configuration instantiation request was rejected.
Error: An error occurred
error
LOG_DAEMON
Dynamic configuration entry for interface interface-name with session id client-session-id
found an existing entry with a different session id of client-session-id-1.
The dynamic configuration instantiation request matched an existing dynamic
configuration block that had a different session id. The dynamic configuration instantiation
request was rejected.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Listener source-address sent a join to destination-address for group group-address source
sender-address on interface interface-name at time
MLD join event.
Event: This message reports an event, not an error
info
LOG_DAEMON
Listener source-address sent a leave to destination-address for group group-address
source sender-address on interface interface-name at time
MLD leave event.
Event: This message reports an event, not an error
info
Copyright © 2010, Juniper Networks, Inc.