Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 232

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
Action
CHASSISD_GENERIC_WARNING
System Log Message
Description
Type
Severity
Facility
CHASSISD_GETTIMEOFDAY
System Log Message
Description
Type
Severity
Facility
CHASSISD_GRES_UNSUPP_PIC
System Log Message
Description
Type
Severity
Facility
CHASSISD_HIGH_TEMP_CONDITION
System Log Message
Description
168
The chassis process (chassisd) detected the indicated error.
Error: An error occurred
error
LOG_DAEMON
Perform any corrective actions mentioned in the error message.
function-name: error-message
The chassis process (chassisd) generated the indicated warning message.
Error: An error occurred
notice
LOG_DAEMON
Unexpected error from gettimeofday: error-code -- error-message
The chassis process (chassisd) could not obtain the time of day because of the indicated
error.
Error: An error occurred
warning
LOG_DAEMON
Unable to enable graceful Routing Engine switchover; PIC does not support it
The chassis process (chassisd) could not enable graceful Routing Engine switchover
because an installed PIC does not support it.
Error: An error occurred
error
LOG_DAEMON
Chassis temperature over temperature degrees C (message)
The temperature of one or more components (field-replaceable units, or FRUs) exceeded
the indicated temperature, which is the lower of two thresholds. The fans (and impellers,
if applicable) were in the indicated state. The chassis process (chassisd) increased the
speed of all functioning fans and impellers to full speed.
Copyright © 2010, Juniper Networks, Inc.