Chapter 4 Ancpd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 4
ANCPD System Log Messages
ANCPD_COMMAND_OPTIONS
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Access Node Control Protocol process (ancpd), also known as Layer 2 control (l2c),
which works with a special Internet Group Management Protocol (igmp) session to
collect outgoing interface (oif) mapping events in a scalable manner.
ancpd_cmd_opts called with option index arg argument
ancpd process cmd line options not handled by junos_app_init
Event: This message reports an event, not an error
info
LOG_DAEMON
prefix. They are generated by the
ANCPD
65