Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 508

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
Cause
Action
MIB2D_IFD_IFDINDEX_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
MIB2D_IFD_IFINDEX_FAILURE
System Log Message
Description
Type
Severity
Facility
Cause
Action
MIB2D_IFL_IFINDEX_FAILURE
System Log Message
Description
Type
444
The MIB II process (mib2d) could not open the indicated file.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
Ifd index assigned to interface-name changed from old-value to new-value, removing old
interface
There was a change to the ifd Index assigned to the indicated existing interface.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
SNMP index assigned to interface-name changed from old-value to new-value
There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
SNMP index assigned to interface-name.interface-unit changed from old-value to
new-value
There was a change to the SNMP ifIndex assigned to the indicated existing interface.
Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.