Chapter 68 Ppmd System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 68
PPMD System Log Messages
PPMD_ASSERT_SOFT
System Log Message
Description
Type
Severity
Facility
Cause
Action
PPMD_OPEN_ERROR
System Log Message
Description
Type
Severity
Facility
Action
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
packet management process (ppmd), which maintains routing protocol adjacencies for
the routing protocol process (rpd).
Soft assertion failed at line line-number in file 'source-filename' with error "message",
but ppmd with PID pid continued running
The source code for the periodic package management process (ppmd) includes internal
self-consistency checks. As the ppmd process with the indicated process ID (PID)
executed the binary compiled from the indicated source file, a check failed at the indicated
line number in the file. The ppmd process created a diagnostic core file for analysis by
technical support personnel and continued to run.
Error: An error occurred
error
LOG_NEWS
An internal software failure occurred.
Examine the messages that immediately follow this message in the system log for
information about possible causes. Contact a technical support representative, and be
ready to provide the list of messages and the diagnostic core file, if requested.
function-name: open error on pipe to protocol-name (error-message)
The periodic packet management process (ppmd) could not initialize the indicated
protocol.
Error: An error occurred
error
LOG_NEWS
Contact your technical support representative.
prefix. They are generated by the periodic
PPMD
477