Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 409

KMD_PM_UNKNOWN_PHASE2_ENTITIES
System Log Message
Description
Type
Severity
Facility
KMD_PM_UNKNOWN_QM_NOTIFICATION
System Log Message
Description
Type
Severity
Facility
KMD_PM_UNSUPPORTED_KEY
System Log Message
Description
Type
Severity
Facility
KMD_PM_UNSUPPORTED_MODE
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
No Phase-2 entities present in tunnel configuration block sa-name
Unable to initiate Phase-2 negotiation because of unknown local and remote traffic
selectors in the indicated security association configuration block. For Adaptive Service
PIC, the security association configuratin block refers to the tunnel configured under a
service set with a given rule name and term name.
Error: An error occurred
error
LOG_SYSLOG
Unknown Quick mode notification notification-name (notification-type) (size lengthubytes)
from remote-address:remote-port for protocol=protocol-idd spi(sizeu)=data
The notification message sent by the indicated remote gateway and remote port is not
recognized. Hence Quick Mode notification payload is dropped.
Error: An error occurred
error
LOG_SYSLOG
Key type = type, not supported
The specified key type is unsupported. Public/Private and Pre-shared key are are the
only types supported presently.
Error: An error occurred
error
LOG_SYSLOG
New group mode not supported currently
The IKE New Group mode negotiations failed, because this is not a supported feature
currently.
Error: An error occurred
error
LOG_SYSLOG
Chapter 43: KMD System Log Messages
345