Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 637

RT_GTP_SANITY_EXTENSION_HEADER
System Log Message
Description
Type
Severity
Facility
RT_GTP_SYSTEM_ERROR
System Log Message
Description
Type
Severity
Facility
RT_H323_CALL_LIMIT_EXCEED
System Log Message
Description
Type
Severity
Facility
RT_H323_NAT_COOKIE_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
RT_IPSEC_BAD_SPI
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
*** GTP-DROP message-type (sanity): wrong extension header
The GPRS tunneling protocol (GTP) packet has an incorrect extension header and the
packet will be dropped.
Error: An error occurred
error
LOG_PFE
*** GTP-DROP message-type: bad system status (error-code)
The GPRS tunneling protocol (GTP) packet was dropped due to a firewall system error,
as indicated by the error code.
Error: An error occurred
error
LOG_PFE
Failed to process the packet, active call limit exceeded maximum-value
The maximum H.323 call limit has been exceeded.
Error: An error occurred
error
LOG_PFE
object-name cannot find cookie from session
Failed to find the H.323 NAT cookie.
Error: An error occurred
error
LOG_PFE
IPSec tunnel on int interface-name with tunnel ID 0xtunnel-id received a packet with a
bad SPI. source-address->destination-address/length, type, SPI 0xindex, SEQ
0xsequence-number.
Received IPSec packet with bad SPI
Chapter 74: RT System Log Messages
573