Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 690

Junos 10.3 System Log Messages Reference
TASK_TASK_BEGIN
System Log Message
Description
Type
Severity
Facility
TASK_TASK_CHILDKILLED
System Log Message
Description
Type
Severity
Facility
TASK_TASK_CHILDSTOPPED
System Log Message
Description
Type
Severity
Facility
TASK_TASK_FORK
System Log Message
Description
Type
Severity
Facility
TASK_TASK_GETWD
System Log Message
Description
Type
626
Commencing virtual chassis control daemon, version process-version, built date by builder
The process started.
Event: This message reports an event, not an error
notice
ANY
task-name terminated by SIGsignal-namecore-dump-status
While a child process was performing the indicated operation, it terminated in response
to the indicated signal.
Event: This message reports an event, not an error
error
ANY
task-name stopped by SIGsignal-name
While a child process was performing the indicated operation, it stopped in response to
the indicated signal.
Event: This message reports an event, not an error
error
ANY
Unable to fork task-name: error-message
This process failed to create the indicated child process.
Error: An error occurred
error
ANY
getwd: error-message
The getwd() system call failed.
Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.