Table of Contents
Advertisement
CHAPTER 60
MPLS_OAM System Log Messages
MPLS_OAM_FANOUT_LIMIT_REACHED
System Log Message
Description
Type
Severity
Facility
Action
MPLS_OAM_INVALID_SOURCE_ADDRESS
System Log Message
Description
Type
Severity
Facility
Action
MPLS_OAM_PATH_LIMIT_REACHED
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Multiprotocol Label Switching (MPLS) Operation, Administration, and Maintenance
(OAM) process (mplsoamd), which supports traceroute operations for LDP label-switched
paths (LSPs).
fec-address: traceroute fanout limit was reached
The traceroute fanout limit was reached.
Error: An error occurred
info
LOG_DAEMON
Raise the traceroute fanout limit parameter.
fec-address: source address ip-address is invalid
The traceroute utility is configured to use an invalid source address.
Error: An error occurred
error
LOG_DAEMON
Configure traceroute to use a valid source address.
fec-address: traceroute path limit was reached
The traceroute path limit was reached.
Error: An error occurred
info
prefix. They are generated by the
MPLS_OAM
449
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 and is the answer not in the manual?
Questions and answers