Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 235

Type
Severity
Facility
Action
CHASSISD_I2C_GENERIC_ERROR
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_I2C_INVALID_ASSEMBLY_ID
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_I2C_IOCTL_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_I2C_IO_FAILURE
System Log Message
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: error-message
The indicated error occurred during an I2C access library operation.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
'0xassembly-id' is invalid value for fru-name assembly ID
The assembly ID for the indicated component (field-replaceable unit, or FRU) was not
valid for its type.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: operation ioctl failure for group group-id at address 0xaddress (errno
error-code)
The chassis process (chassisd) could not perform the indicated ioctl() operation on the
I2C data for the indicated component (field-replaceable unit, or FRU).
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: fru-name operation failed for group group-id at address 0xaddress
Chapter 18: CHASSISD System Log Messages
171