Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 212

Junos 10.3 System Log Messages Reference
Description
Type
Severity
Facility
CHASSISD_FCHIP_HST_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_FCHIP_HST_INIT_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_FCHIP_HST_INIT_LINK_ERR
System Log Message
Description
Type
Severity
Facility
CHASSISD_FCHIP_HST_RESET_ERROR
System Log Message
Description
Type
Severity
148
A high-speed receiver (HSR) reset error occurred during initialization of the indicated F
chip and link.
Error: An error occurred
error
LOG_DAEMON
Fchip high-speed transmitter (HST) error: error-message
The chassis process (chassisd) detected an error in the high-speed transmitter (HST)
subsystem for the F chip with the indicated characteristics.
Error: An error occurred
error
LOG_DAEMON
HST: No vectors supplied
The chassis process (chassisd) could not initialize the high-speed transmitter (HST)
subsystem for an F chip.
Error: An error occurred
error
LOG_DAEMON
Fchip fchip-id: unable to initialize HST link link-id
The chassis process (chassisd) could not initialize the indicated high-speed transmitter
(HST) link for the indicated F chip.
Error: An error occurred
error
LOG_DAEMON
Fchip fchip-id: hst_reset error in fchip_init() on link link-id
A high-speed transmitter (HST) reset error occurred during initialization of the indicated
F chip and link.
Error: An error occurred
error
Copyright © 2010, Juniper Networks, Inc.