Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 382

Junos 10.3 System Log Messages Reference
Cause
Cause
Action
JSRPD_NOT_ROOT
System Log Message
Description
Type
Severity
Facility
JSRPD_PID_FILE_LOCK
System Log Message
Description
Type
Severity
Facility
JSRPD_PID_FILE_UPDATE
System Log Message
Description
Type
Severity
Facility
JSRPD_REDUNDANCY_MODE_CHANGE
System Log Message
Description
318
A link failure occurred and the secondary node is disabled.
The secondary node has recovered from link failure and is being rebooted to recover from
the disabled state.
Contact your technical support representative.
Must be run as root
The Juniper Services Redundancy Protocol process (JSRPD) can be instantiated only by
the user with root privileges.
Error: An error occurred
error
LOG_DAEMON
Unable to lock PID file: error-message
The Juniper Services Redundancy Protocol process (JSRPD) failed to lock the PID file,
which serves to prevent multiple instances of the process from running simultaneously.
Error: An error occurred
error
LOG_DAEMON
Unable to update process PID file: error-message
The Juniper Services Redundancy Protocol process (JSRPD) failed to update the PID file,
which serves to prevent multiple instances of the process from running simultaneously.
Error: An error occurred
error
LOG_DAEMON
Redundancy mode change will not be effective until all nodes in the cluster are rebooted
simultaneously
The Juniper Services Redundancy Protocol process (JSRPD) detected a change in chassis
cluster redundancy mode. The new mode is not effective until all nodes in the cluster
are rebooted.
Copyright © 2010, Juniper Networks, Inc.