Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 284

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
Cause
Action
COSD_MALLOC_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
COSD_MPLS_DSCP_CLASS_NO_SUPPORT
System Log Message
Description
Type
Severity
Facility
Action
COSD_MULTILINK_CLASS_CONFLICT
System Log Message
Description
220
Error: An error occurred
error
LOG_DAEMON
The interface is not housed on one of the PIC types that support large delay buffer.
Remove the large delay buffer configuration from the interface.
malloc failed: error-message
The class-of-service (CoS) process (cosd) could not dynamically allocate memory for
the indicated reason.
Error: An error occurred
error
LOG_DAEMON
A software bug caused a memory leak or the Routing Engine did not have sufficient
memory.
Contact your technical support representative.
Cannot support MPLS DSCP classifier on ifl interface-name
The MPLS Differentiated Services code point (DSCP) classifier is only supported on I-Chip
based Flexible PIC Concentrators (FPCs). It is not supported on Q2 PICs.
Error: An error occurred
error
LOG_DAEMON
Remove the MPLS DSCP classifier configuration from the logical interface.
Fragmentation map fragmentation-map for wildcard wildcard-interface-name specified
multilink class class-name for queue queue-number on interface interface-name, which
exceeds configured limit of limit
The indicated fragmentation map is normally applied to interfaces that match the
indicated wildcard, and specifies the indicated multilink class setting for queues on those
interfaces. The class-of-service (CoS) process (cosd) did not apply the fragmentation
map to the indicated interface, even though it matches the wildcard, because the setting
in the map exceeds the indicated class limit, which is configured on the interface itself.
Copyright © 2010, Juniper Networks, Inc.