Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 243

Description
Type
Severity
Facility
Action
CHASSISD_IPC_MSG_FRU_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_IPC_MSG_QFULL_ERROR
System Log Message
Description
Type
Severity
Facility
CHASSISD_IPC_MSG_UNHANDLED
System Log Message
Description
Type
Severity
Facility
Copyright © 2010, Juniper Networks, Inc.
The chassis process (chassisd) detected an error in an interprocess communication (IPC)
message with the indicated characteristics.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
function-name: unable to locate FRU for message with type message-type, subtype
message-subtype, opcode message-opcode
The chassis process (chassisd) could not locate a component (field-replaceable unit,
or FRU) to handle the interprocess communication (IPC) message with the indicated
characteristics that it received. The message was ignored.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
Dropping message from connection queue: type = message-type, subtype =
message-subtype
The chassis process (chassisd) had to discard a message because the queue of messages
waiting for a connection was already full.
Error: An error occurred
error
LOG_DAEMON
function-name: unable to handle fru-name message with type message-type, subtype
message-subtype, length length, opcode message-opcode, error error-code
The chassis process (chassisd) received an interprocess communication (IPC) message
about the indicated FRU. The message had the indicated characteristics. The chassisd
process could not handle the message.
Error: An error occurred
error
LOG_DAEMON
Chapter 18: CHASSISD System Log Messages
179