Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 661

Facility
Cause
Action
SNMP_TRAP_LINK_DOWN
System Log Message
Description
Type
Severity
Facility
SNMP_TRAP_LINK_UP
System Log Message
Description
Type
Severity
Facility
SNMP_TRAP_TRACERT_PATH_CHANGE
System Log Message
Description
Type
Severity
Facility
SNMP_TRAP_TRACERT_TEST_COMPLETED
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status,
ifName interface-name
The SNMP agent process (snmpd) generated a linkDown trap because the indicated
interface changed state to 'down'.
Event: This message reports an event, not an error
warning
LOG_DAEMON
ifIndex snmp-interface-index, ifAdminStatus admin-status, ifOperStatus operational-status,
ifName interface-name
The SNMP agent process (snmpd) generated a linkUp trap because the indicated interface
changed state to 'up'.
Event: This message reports an event, not an error
info
LOG_DAEMON
traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name
The Simple Network Management Protocol (SNMP) remote operations process (rmopd)
generated a traceRoutePathChange trap because two probes with the same time-to-live
(TTL) value returned with different IP addresses.
Event: This message reports an event, not an error
info
LOG_DAEMON
traceRouteCtlOwnerIndex = test-owner, traceRouteCtlTestName = test-name
The Simple Network Management Protocol (SNMP) remote operations process (rmopd)
generated a tracerouteTestCompleted trap because the test completed and the full
path to the target was determined.
Chapter 81: SNMP System Log Messages
597