Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 223

Severity
Facility
Action
CHASSISD_FM_ERROR_SIB_L_HSR_TXP
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR_SIB_L_MISMATCH
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_FM_ERROR_SIB_L_VC_PWR
System Log Message
Description
Copyright © 2010, Juniper Networks, Inc.
error
LOG_DAEMON
Contact your technical support representative.
FM: error-message on LCC:lcc FPCfpc-slot_pfe link connected by
ST-SIB-Lfrom-lcc-sib_fchip-id_s-port_FBfiber-bundle to F13SIBto-sfc-sib
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated ST-SIB-L
detected an error in the electrical path between the indicated ports on the SIB-L and the
corresponding F13SIB.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
FM: fiber cable from SIB-L#sib-slot possibly connected to wrong SIB-S
In a routing matrix, the fiber-optic cable between each Switch Interface Board in a T640
routing node (called a SIB-L) must connect to a specific SIB port on the TX Matrix platform
(called a SIB-S). The cable originating at the indicated SIB-L was possibly plugged into
the wrong SIB-S port or wrong SIB-S.
Error: An error occurred
error
LOG_DAEMON
Contact your technical support representative.
FM: High power difference at LCC lcc SIB_Lsib-slot_FBfiber-bundle VCSEL vcsel Channel
vcsel-channel connected to F13SIBfrom-sfc-sib
In a Tx-Plus routing matrix, packets traverse both electrical and optical media as they
travel between the Switch Interface Boards (SIBs) in the T1600 routing nodes (called
ST-SIB-Ls) and the SIBs in the TX Matrix Plus platform (called F13SIBs and F2S-SIBs).
The chassis process (chassisd) on the routing node that houses the indicated ST-SIB-L
detected higher than configured receive power levels on the indicated fiber-bundles
connected to the indicated LCC ST-SIB-L.
Chapter 18: CHASSISD System Log Messages
159