Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 267

CHASSISD_SMB_INVALID_PS
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_SMB_IOCTL_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_SMB_READ_FAILURE
System Log Message
Description
Type
Severity
Facility
Action
CHASSISD_SNMP_TRAP1
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
function-name: invalid power supply status code (0xstatus-code)
The chassis process (chassisd) could not set the status (enabled or disabled) for a power
supply, because it received the indicated power supply status code, which is invalid.
Error: An error occurred
critical
LOG_DAEMON
Contact your technical support representative.
function-name: 'operation' ioctl failed on system management bus (address
0xmemory-address, cmd 0xcommand)
The indicated ioctl() operation failed at the indicated address on the system management
bus (SMB).
Error: An error occurred
critical
LOG_DAEMON
Contact your technical support representative.
function-name: read() failed on system management bus (address 0xmemory-address)
A read() operation failed at the indicated address on the system management bus (SMB).
Error: An error occurred
critical
LOG_DAEMON
Contact your technical support representative.
SNMP trap generated: trap (argument1 value1)
The chassisd process (chassisd) generated the indicated simple network management
protocol (snmp) trap with the indicated value.
Event: This message reports an event, not an error
notice
Chapter 18: CHASSISD System Log Messages
203