Chapter 59 Mib2D System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 59
MIB2D System Log Messages
MIB2D_ATM_ERROR
System Log Message
Description
Type
Severity
Facility
Cause
Action
MIB2D_CONFIG_CHECK_FAILED
System Log Message
Description
Type
Severity
Facility
Cause
Action
MIB2D_FILE_OPEN_FAILURE
System Log Message
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
Management Information Base II (MIB II) process (mib2d), which services requests for
information gathered and reported by the Simple Network Management Protocol (SNMP).
function-name: error-message
The MIB II process (mib2d) could not process ATM-related information.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
function-name: configuration database has errors
The portion of the candidate configuration related to the MIB II process (mib2d) was
checked for validity during a 'commit' operation. The check failed.
Error: An error occurred
error
LOG_DAEMON
The configuration was invalid.
Correct the invalid portion of the configuration as described in the error message on the
console.
Unable to open file 'filename': error-message
prefix. They are generated by the
MIB2D
443