Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 407

Type
Severity
Facility
KMD_PM_SA_INDEX_GEN_FAILED
System Log Message
Description
Type
Severity
Facility
KMD_PM_SA_PEER_ABSENT
System Log Message
Description
Type
Severity
Facility
KMD_PM_SA_PEER_NOT_FOUND
System Log Message
Description
Type
Severity
Facility
KMD_PM_SPI_DELETE_REJECT
System Log Message
Description
Type
Severity
Copyright © 2010, Juniper Networks, Inc.
Error: An error occurred
error
LOG_AUTH
Unable to generate pair index for SA sa-name in service set service-set
The key management process (kmd) could not generate a pair index for the indicated
security association (SA) in the indicated service set. The kmd process canceled Internet
Key Exchange (IKE) Phase 2 negotiation.
Error: An error occurred
error
LOG_AUTH
No active peer found in tunnel configuration block sa-name
Failed to find active peer information in the tunnel configuration block. Hence unable to
send SA delete notifications to the peer.
Error: An error occurred
error
LOG_SYSLOG
Unable to find active peer for SA sa-name
The key management process (kmd) could not retrieve information about an active peer
from the configuration for the indicated security association (SA). As a result, it could
not notify peers that an SA was deleted.
Error: An error occurred
error
LOG_AUTH
IKE Phase-2 delete:In instance service-set rejecting request to delete SPI size sizeu != 4
Local gateway local-address:local-port, Remote gateway remote-address:remote-port
The SPI size in the delete notification is invalid. Hence delete request is rejected. Quick
Mode notification payload is dropped.
Error: An error occurred
error
Chapter 43: KMD System Log Messages
343