Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 562

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
RPD_AMT_CFG_ADDR_FMLY_INVALID
System Log Message
Description
Type
Severity
Facility
Action
RPD_AMT_CFG_ANYCAST_INVALID
System Log Message
Description
Type
Severity
Facility
Action
RPD_AMT_CFG_ANYCAST_MCAST
System Log Message
Description
Type
Severity
Facility
Action
RPD_AMT_CFG_LOC_ADDR_INVALID
System Log Message
Description
Type
Severity
498
Event: This message reports an event, not an error
notice
LOG_DAEMON
Valid address family information is required
An invalid address family value was encountered while parsing AMT configuration.
Event: This message reports an event, not an error
warning
ANY
Modify the configuration statement to use a valid value.
An invalid anycast-prefix is configured
An invalid anycast prefix was encountered while parsing AMT configuration.
Event: This message reports an event, not an error
warning
ANY
Modify the configuration statement to use a valid value.
Anycast-prefix route-prefix cannot be a multicast address
A multicast address cannot be configured as the anycast-prefix
Event: This message reports an event, not an error
warning
ANY
Modify the configuration statement to use a valid value.
An invalid local-address is configured
An invalid local address was encountered while parsing AMT configuration.
Event: This message reports an event, not an error
warning
Copyright © 2010, Juniper Networks, Inc.