Chapter 81 Snmp System Log Messages - Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual

CHAPTER 81
SNMP System Log Messages
SNMP_GET_ERROR1
System Log Message
Description
Type
Severity
Facility
Cause
Action
SNMP_GET_ERROR2
System Log Message
Description
Type
Copyright © 2010, Juniper Networks, Inc.
This chapter describes messages with the
of processes:
Processes that perform SNMP operations, such as the MIB II process (mib2d) and the
SNMP agent process (snmpd). Those processes also generate messages with prefixes
that match their names, as described in "MIB2D System Log Messages" on page 373
and "SNMPD System Log Messages" on page 513.
Processes that are instrumented to generate system log messages when they send
SNMP traps. The SNMP remote operations process (rmopd) is one such process. It
also generates messages with the RMOPD_ prefix, which are described in "RMOPD
System Log Messages" on page 419.
function-name operation failed for object-name: index1 index1 (error-message)
An SNMP Get or GetNext request failed for the indicated object, which has the indicated
index.
Error: An error occurred
error
LOG_DAEMON
An internal software failure occurred.
Contact your technical support representative.
function-name operation failed for object-name: index1 index1 index2 index2
(error-message)
An SNMP Get or GetNext request failed for the indicated object, which has the indicated
indexes.
Error: An error occurred
prefix. They are generated by two kinds
SNMP
595