Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Reference Manual page 612

Junos 10.3 System Log Messages Reference
Type
Severity
Facility
Action
RPD_PARSE_CMD_EXTRA
System Log Message
Description
Type
Severity
Facility
Action
RPD_PIM_NBRDOWN
System Log Message
Description
Type
Severity
Facility
RPD_PIM_NBRUP
System Log Message
Description
Type
Severity
Facility
RPD_PLCY_CFG_COMMUNITY_FAIL
System Log Message
Description
Type
548
Error: An error occurred
error
LOG_DAEMON
Reissue the command without the duplicate option.
executable-name: command-line option option is extraneous
The command line used to start the indicated process included the indicated option,
which is extraneous. The process did not start.
Error: An error occurred
error
LOG_DAEMON
Reissue the command and omit the extraneous option.
Instance routing-instance: PIM neighbor neighbor-address (interface-name) removed due
to: reason
The routing protocol process (rpd) declared the indicated PIM neighbor inactive.
Event: This message reports an event, not an error
notice
LOG_DAEMON
Instance routing-instance: PIM new neighbor neighbor-address interface interface-name
The routing protocol process (rpd) discovered the indicated new PIM neighbor on the
indicated interface.
Event: This message reports an event, not an error
info
LOG_DAEMON
Failed to parse community string under policy-options: error-message
The routing protocol process (rpd) encountered a non-catastrophic error in bgp
community member string while parsing policy-options.
Event: This message reports an event, not an error
Copyright © 2010, Juniper Networks, Inc.